TB8100 Service Kit User’s Manual Software Feature Enabler 15
Software Feature Enabler
The TB8100 base station has many capabilities, but some of them require a
license before you can use them. The Service Kit lets you enable the feature sets
you require. The following feature sets are available:
Default Radio
System
Generally, base stations are already licensed with the Default Radio System
feature set. Without it, the base station cannot operate in Run mode, but could
be used for training.
Alarm Reporting The Alarm Reporting feature set enables the base station to remotely dial up
using a modem. This means that the base station can report alarms to an Alarm
Center or email status messages to a technician (this is done via the Alarm
Center).
Advanced Profiles
and Task
Manager
The Advanced Profiles and Task Manager feature set enables the base station to
operate according to custom channel and signalling profiles that you define
using the Service Kit. It also lets Task Manager process up to 200 tasks.
Power Saving
Modes
The Power Saving Modes feature set makes it possible for the base station to
operate in Sleep and Deep Sleep modes. This takes full advantage of the power
management unit’s power saving capabilities.
To Next Page
Loading...
Need help?
General
