TB8100 Service Kit User’s Manual Configuration Tutorial 25
5. Click OK. The Log On dialog box appears.
6. Select the User access level and enter the equivalent password (the default is
user).
7. Click OK to log on.
Tip: You can get the base station receiving and transmitting on the
frequencies you want without changing its configuration. Use the
set receiver frequency and transmission diagnostic tests.
Step 3: Read the Base Station’s Configuration
1. Click Read. The Reading dialog box displays progress.
2. Click Configure. The navigation pane displays a menu of options for
configuring the base station.
Step 4: Configure the Base Station as a Talk-Through Repeater
1. In the navigation pane, under Base Station, click General.
2. Click Channel Profile. The Edit Channel Profile dialog box appears.
To Next Page
Loading...
Need help?
General
