Tektronix DPO5104B Printable Help

Learn about bus configuration.
Learn about digital setups.
Learn how to set up an I2C serial bus.
Learn how to set up an SPI serial bus.
Learn how to set up a USB serial bus.
Learn how to set up an RS-232 serial bus.
Learn how to set up a MIPI DSI1 Serial Bus
Learn how to set up a MIPI CSI2 Serial Bus
Learn how to set up an 8B10B Serial Bus
Learn how to set up a CAN Bus
Learn how to set up a MIL-1553 Bus
Learn how to set up an Ethernet Bus
Learn how to set up an Custom serial bus.
Learn how to troubleshoot a serial bus.
Learn how to track down serial bus anomalies.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Learn to view the bus packets.
Set up a MIPI CSI-2 serial bus
NOTE. MIPI CSI-2 serial bus setup is available only on instruments with the SR-DPHY option.
From the Bus Setup window in the Config tab, select a bus from the Bus list and then select the MIPI CSI-2 Serial bus type.
NOTE. The Components for the MIPI CSI-2 bus standard are set by the instrument.
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Serial Input
■
Lanes
■
Channel Type
■
Serial Threshold
Bus setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 121

Tektronix DPO5104B Specifications

General

Brand	Tektronix
Model	DPO5104B
Category	Test Equipment
Language	English