Measurement menu
Use Measurement menu commands to select from and set up a variety of automatic measurements. Commands are also
available on this menu for further in-depth analysis, gating (bounding), statistics, communication, and histograms.
Trigger menu
Use the Trigger menu to set up the instrument to trigger on live waveforms. Several different types of triggering are available.
Utilities menu
The Utilities menu provides access to utilities used by the instrument such as instrument calibration, instrument diagnostics, and
user preferences. All utilities are accessible from the menu bar only. None of the utilities are directly accessible from the front
panel controls or from the toolbar.
Vertical menu
Use the Vertical menu options to set vertical parameters for waveforms. This menu also provides access to the Zoom controls
and the probe compensation, deskew, and attenuation functions.
Set the vertical position
From the Vertical menu, select Position/Scale.
Overview. Use the Position control to set the vertical position of the selected waveform.
To use.
â–
Click in the Position entry box to map it to one of the multipurpose knobs; then use the knob to move the waveform.
â–
You can also use the up-down arrows to change the value.
Oscilloscope reference
842 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series
To Next Page
Loading...
Need help?
General
