To Next Page

To Previous Page

Horizontal and acquisition setups

Horizontal-Acquisition control window (Horizontal tab)

From the Horiz/Acq menu, select Horizontal/Acquisition Setup; then open the Horizontal tab.

Overview

The Horizontal control window manages the horizontal parameters of waveforms. The controls in the Horizontal tab are common

to all channels.

Use the Horizontal tab to set up the horizontal mode and to adjust the horizontal scale. Normally, the horizontal axis displays time

information. However, in some cases, the horizontal axis can represent frequency rather than time.

NOTE. This document is for more than one instrument. Your instrument, or instrument setup, may not include some of these

features.

For information on the controls, click the buttons.

■

Mode

■

Controls

■

Readouts

■

Delay Mode

■

Horiz Zoom

■

Ext Ref

In the following two screens, Digital Sample Rate, Digital Resolution, and Digital Record Length only appear on MSO series

instrument.

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 181

Tektronix DPO5104B Printable Help

Other manuals for Tektronix DPO5104B