Tektronix DPO5104B Printable Help

Bus trigger on selections
For MSO Series instruments, select the type of data to trigger on. The available selections in the Trigger On drop-down list are
different for each serial bus.
Set logic thresholds
NOTE. This online help file supports many oscilloscope models from Tektronix. This feature is only available on some models.
For the supported instruments, from the Trigger menu or from the Search and Mark menu, select the Bus, the Logic Pattern, or
the Logic State trigger. Click the Logic Thresholds button to access the Threshold Setup dialog box.
Use the controls to set up the Threshold Setup parameters for a Pattern or a State trigger.
NOTE. When you select a Pattern or a State trigger as the B Event, digital channels are not available.
The instrument displays a different Threshold Setup dialog box for each type of bus defined: parallel or serial types.
This is an example of the Threshold Setup dialog box when you select a parallel bus in the Bus list of the Trigger menu.
Oscilloscope reference
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 853

Tektronix DPO5104B Specifications

General

Brand	Tektronix
Model	DPO5104B
Category	Test Equipment
Language	English