Toshiba e-studio555 User Manual

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 8
5.3 Relation between the Equipment State and Operator’s
Operation
Operation
During READY
status
During warming-up
Auto job start
reserved
Scanning original/
Scanning original and
printing out the copy
Press [ENERGY
SAVER] button
Switches to energy
saving mode
Display not changed Display not
changed
Display not changed
Press [ACCESS]
button
When the setting of
the department
management or user
management
information is valid,
displays ACCESS
screen.
When the setting of
the department
management or user
management
information is valid,
displays ACCESS
screen.
Display not
changed
Display not changed
Press
[INTERRUPT]
button
Switches to interrupt
mode
Display not changed Display not
changed
Display not changed
(LED blinking)
Press
[FUNCTION CLEAR]
button after setting
the copy mode
Copy mode is
cleared after the
copy mode is set
Copy mode is
cleared after the
copy mode is set
Auto job start
cancelled
Display not changed
Press
[STOP] button
Display not changed Display not changed Auto job start
cancelled
Scanning or printing out
stops, and “READY
Press START to copy”
and “MEMORY CLEAR”
are displayed
Press [CLEAR]
button after setting
the copy mode
Number of printouts
changes to 1 while
the setting remains
unchanged after the
copy mode is set
Number of printouts
changes to 1 while
the setting remains
unchanged after the
copy mode is set
Display not
changed
Display not changed
Press [CLEAR]
button after keying in
numbers (digital
keys)
Number keyed in
changes to 1 after
being entered
Number keyed in
changes to 1 after
being entered
Display not
changed
Display not changed
Press [FAX]
button
Displays FAX screen Display not changed Display not
changed
Display not changed
Press [COPY] button Display not changed Display not changed Display not
changed
Display not changed
Press [SCAN] button Displays SCAN
screen
Display not changed Display not
changed
Display not changed
Press [e-FILING] Displays E-FILING
screen
Display not changed Display not
changed
Display not changed
Press [USER
FUNCTIONS] button
Displays USER
FUNCTIONS screen
Display not changed Display not
changed
Display not changed
Press [START]
button with the
original set on RADF
Displays
“COPYING”
“Wait Warming Up
Auto Start” is
displayed
Display not
changed
Display not changed
Press [MENU]
button
Displays MENU
screen
Display not changed Display not
changed
Display not changed
Press [COUNTER]
button
Displays COUNTER
screen
Display not changed Display not
changed
Display not changed

Toshiba e-studio555 Specifications

Power

power supply	120 Volts; 20 Amps
power consumption	Maximum 2.0kW
warm-up time	Appx. 130 Seconds

Printing and Copying

copy/print resolution	2400 x 600 dpi
copy/print speed	55 / 65 / 75 / 85 cpm
print speed	55 / 65 / 75 / 85 ppm

Scanning

scan speed	80 spm LT-Size @300 dpi
scan resolution	150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
file format	TIFF, PDF, JPEG, XPS, MS Word, MS Excel, Searchable PDF w/ Adv. Scanning option

Memory and Storage

memory	1GB RAM, 60 GB HDD
fax memory transmission	500MB (HDD)
reception	500MB (HDD)

Connectivity

connectivity	Ethernet 10/100BaseT, USB 2.0, 802.11b/g Wireless LAN, Bluetooth (HCRP)
protocol support	IPX/SPX, TCP/IP (IPV4/V6), EtherTalk, AppleTalk PAP, LPR/LPD, IPP w/Authentication, Port 9100
operating systems	Windows 2000/XP/2003/Vista/2008, Mac X OS 10.2.4/10.3/10.4/10.5, UNIX, Linux, CUPS

Weight and Dimensions

dimensions	28” x 31” x 46” (W x D x H)
weight	462 lbs
standard paper supply	2 x 500-Sheet Drawer; 2 x 1, 250-Sheet Tandem Drawer; 100-Sheet Stack Feed Bypass