Toshiba e-studio555 User Manual

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 2
15.2 Functions
1. Pickup roller
This roller pulls out the original on the original tray and transports it to the feed roller.
2. Feed roller
This roller is placed against the separation roller. It transports the original sent by the pickup roller.
3. Separation roller
This roller is placed against the feed roller. When two originals or more are transported from the
pickup roller, the load of the torque limiter of the separation roller is heavier than the frictional force
between the sheets. As a result, the separation roller is stopped and the lower paper is not
advanced any further.
4. Registration roller
This roller aligns the sheets sent by the transport roller.
5. Intermediate transport roller / Reading start roller
These rollers transport the original to the RADF original glass.
6. Reading end roller
This roller transports the original scanned at the RADF original glass to the reverse paper path or
the exit paper path.
7. Reverse roller
This roller switches back the original during duplex scanning.
8. Reverse registration roller
This roller aligns the original switched back by the reverse roller and transports it to the intermediate
transport roller.
9. Exit intermediate roller
This roller transports the original sent from the reading end roller to the exit path and switches it
back.
10.Exit/reverse roller
This roller transports the original reversed in the exit path to the exit roller.
11.Exit roller
This roller transports the original to the original exit tray.

Toshiba e-studio555 Specifications

Power

power supply	120 Volts; 20 Amps
power consumption	Maximum 2.0kW
warm-up time	Appx. 130 Seconds

Printing and Copying

copy/print resolution	2400 x 600 dpi
copy/print speed	55 / 65 / 75 / 85 cpm
print speed	55 / 65 / 75 / 85 ppm

Scanning

scan speed	80 spm LT-Size @300 dpi
scan resolution	150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
file format	TIFF, PDF, JPEG, XPS, MS Word, MS Excel, Searchable PDF w/ Adv. Scanning option

Memory and Storage

memory	1GB RAM, 60 GB HDD
fax memory transmission	500MB (HDD)
reception	500MB (HDD)

Connectivity

connectivity	Ethernet 10/100BaseT, USB 2.0, 802.11b/g Wireless LAN, Bluetooth (HCRP)
protocol support	IPX/SPX, TCP/IP (IPV4/V6), EtherTalk, AppleTalk PAP, LPR/LPD, IPP w/Authentication, Port 9100
operating systems	Windows 2000/XP/2003/Vista/2008, Mac X OS 10.2.4/10.3/10.4/10.5, UNIX, Linux, CUPS

Weight and Dimensions

dimensions	28” x 31” x 46” (W x D x H)
weight	462 lbs
standard paper supply	2 x 500-Sheet Drawer; 2 x 1, 250-Sheet Tandem Drawer; 100-Sheet Stack Feed Bypass