Toshiba e-studio555 User Manual

e-STUDIO555/655/755/855 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
EXTERNAL COUNTERS
18 - 4
18.3 Notices
[A] Setting code
Each signal will be enabled by configuring the setting code “08-202” (Counter installed externally).
08-202
0: No external counter (Default)
1: Coin controller
2: Card controller (For Japan only)
3: Key copy counter
4: Card controller for OEM1
[B] Setting value change and restrictions when using the Card controller
1. Setting value
- 08-202 (Counter installed externally): Set to “2” (Card controller).
- 08-381 (Setting for counter installed externally): It should be charged precisely according to the
usage.
Example: To charge only when copies are made, set to “1”.
2. Restrictions
- 08-352 (Large size double count setting): Set to “0” (Single count).
[C] Setting value change and restrictions when using the coin controller
1. Setting value
- 08-202 (Counter installed externally): Set to “1” (Coin controller).
- 08-381 (Setting for counter installed externally): It should be charged precisely according to the
usage.
Example: To charge only when copies are made, set to “1”.
2. Restrictions
For 08-353 (Large size double count setting), set to “0” when A3 and LD are specified as the large
size, and set to “1” when B4, LG, FOLIO and COMP are specified as the large size in addition to A3
and LD.
[D] Setting value change and restrictions when using the key counter
1. Setting value
- 08-202 (Counter installed externally): Set to “3” (key counter)
- 08-381(Setting for counter installed externally): It should be charged precisely according to the
usage.
Example: To charge only when copies are made, set to “1”.
2. Restrictions
For 08-353 (Large size double count setting), set to “0” when A3 and LD are specified as the large
size, and set to “1” when B4, LG, FOLIO and COMPUTER are specified as the large size in addition
to A3 and LD.
[E] Installation of External Counter
It is not allowed to install more than one external counter (Key Counter, Card controller and Coin
controller) at the same time. Physically, the card controller and coin controller cannot be installed
together since the output signals are in common.

Toshiba e-studio555 Specifications

Power

power supply	120 Volts; 20 Amps
power consumption	Maximum 2.0kW
warm-up time	Appx. 130 Seconds

Printing and Copying

copy/print resolution	2400 x 600 dpi
copy/print speed	55 / 65 / 75 / 85 cpm
print speed	55 / 65 / 75 / 85 ppm

Scanning

scan speed	80 spm LT-Size @300 dpi
scan resolution	150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
file format	TIFF, PDF, JPEG, XPS, MS Word, MS Excel, Searchable PDF w/ Adv. Scanning option

Memory and Storage

memory	1GB RAM, 60 GB HDD
fax memory transmission	500MB (HDD)
reception	500MB (HDD)

Connectivity

connectivity	Ethernet 10/100BaseT, USB 2.0, 802.11b/g Wireless LAN, Bluetooth (HCRP)
protocol support	IPX/SPX, TCP/IP (IPV4/V6), EtherTalk, AppleTalk PAP, LPR/LPD, IPP w/Authentication, Port 9100
operating systems	Windows 2000/XP/2003/Vista/2008, Mac X OS 10.2.4/10.3/10.4/10.5, UNIX, Linux, CUPS

Weight and Dimensions

dimensions	28” x 31” x 46” (W x D x H)
weight	462 lbs
standard paper supply	2 x 500-Sheet Drawer; 2 x 1, 250-Sheet Tandem Drawer; 100-Sheet Stack Feed Bypass