Toshiba e-studio555 User Manual

1
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO555/655/755/855
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 17
1.3 Options
* The finisher (MJ-1027/1028) is necessary for the installation of the hole punch unit (MJ-6003N/E/F/
S) and the inserter (MJ-7001).
* The Printer kit (GM-1180), Printer/Scanner kit (GM-2180) and Scanner kit (GM-4180) are optional
for TWD/SAD/ASD/AUD model.
* The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1050) and the
bluetooth module (GN-2010).
* Up to 2 antennas (GN-3010) can be connected to the wireless LAN module (GN-1050).
* When the wireless LAN module (GN-1050) and the bluetooth module (GN-2010) are installed
together, only 1 antenna (GN-3010) can be connected to each.
* STAPLE-1700 (100 sheets stapling): 3 cases of 5000 staples in a package
STAPLE-1800 (50 sheets stapling): 3 cases of 5000 staples and one exclusive cartridge in a
package
STAPLE-1900 (50 sheets stapling): 3 cases of 5000 staples in a package
Large Capacity Feeder (LCF) MP-4004L/A
Finisher MJ-1027
Saddle stitch finisher MJ-1028
Saddle stitch finisher (100 sheets stapling) MJ-1029
Staple cartridge STAPLE-700 (for MJ-1027/1028)
STAPLE-1700 (for MJ-1029)
STAPLE-1800 (for MJ-1029)
STAPLE-1900 (for MJ-1029)
STAPLE-600 (for saddle stitch)
Finisher guide rail KN-1017
Hole punch unit MJ-6003N/E/F/S
Inserter MJ-7001
Damp heater kit MF-6000U/E
Fax unit GD-1250NA/EU/AU/AS/C
2nd line for Fax unit GD-1260NA/EU-N/AU/C
Printer kit GM-1180
Printer/Scanner kit GM-2180
Scanner kit GM-4180
Wireless LAN module GN-1050
Bluetooth module GN-2010
Antenna GN-3010
Data overwrite enabler GP-1070
e-BRIDGE ID Gate (HID iClass) KP-2004
e-BRIDGE ID Gate (MIFARE) KP-2005
Meta scan enabler GS-1010
External interface enabler GS-1020
IPsec enabler GP-1080
Harness kit GQ-1240 (for coin controller)
GQ-1050 (for card controller)
GQ-1060 (for card controller)

Toshiba e-studio555 Specifications

Power

power supply	120 Volts; 20 Amps
power consumption	Maximum 2.0kW
warm-up time	Appx. 130 Seconds

Printing and Copying

copy/print resolution	2400 x 600 dpi
copy/print speed	55 / 65 / 75 / 85 cpm
print speed	55 / 65 / 75 / 85 ppm

Scanning

scan speed	80 spm LT-Size @300 dpi
scan resolution	150 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi
file format	TIFF, PDF, JPEG, XPS, MS Word, MS Excel, Searchable PDF w/ Adv. Scanning option

Memory and Storage

memory	1GB RAM, 60 GB HDD
fax memory transmission	500MB (HDD)
reception	500MB (HDD)

Connectivity

connectivity	Ethernet 10/100BaseT, USB 2.0, 802.11b/g Wireless LAN, Bluetooth (HCRP)
protocol support	IPX/SPX, TCP/IP (IPV4/V6), EtherTalk, AppleTalk PAP, LPR/LPD, IPP w/Authentication, Port 9100
operating systems	Windows 2000/XP/2003/Vista/2008, Mac X OS 10.2.4/10.3/10.4/10.5, UNIX, Linux, CUPS

Weight and Dimensions

dimensions	28” x 31” x 46” (W x D x H)
weight	462 lbs
standard paper supply	2 x 500-Sheet Drawer; 2 x 1, 250-Sheet Tandem Drawer; 100-Sheet Stack Feed Bypass