Chapter 9 Implementing a graphical program
104 CNT-SVP01C-EN
Uploading a program
To upload a program from the Tracer MP580/581 controller:
1. From the Program menu, choose Upload from MP580. The Select a
Program dialog box appears.
2. Click the program name you want to upload.
3. Click OK. The program uploads and appears in the workspace. A
message may appear asking you to save changes to the current pro-
gram, if you already had one open.
Deleting a program from the
Tracer MP580/581
To remove an active program from the Tracer MP580/581 controller:
1. From the Program menu, choose Delete Program from MP580. The
Select A Program dialog box appears.
2. Click the program name you want to delete.
3. Click OK. A message appears asking if you are sure you want to
delete the program from the controller.
4. Click Yes. A message appears stating that the program has been
deleted.
5. Click OK. The program has been removed from the controller.
Viewing program status
You can view the status of each program downloaded to the Tracer
MP580/581 controller. The program status includes the program name,
run frequency, and state. It also displays the remaining memory available
for programs.
To view program status:
X From the Tools menu, choose Program Status. The Program Sum-
mary dialog box appears (Figure 73 on page 105).
To Next Page
Loading...
Need help?
General
