Keyboard short cuts
CNT-SVP01C-EN 77
Short cut menus
To view a shortcut menu, use your right mouse button to click any block
or port in the design space (Figure 49). Shortcut menus contain common
commands you can use on the item you clicked. For example, right-click
an input (hardware) block in the design space and choose Properties from
the shortcut menu to edit the properties of the block.
Figure 49. Shortcut menu
Keyboard short cuts
Use keyboard short cuts (Table 5) in the TGP editor to work with program
files and blocks.
Table 5. Keyboard short cuts
Category Function Key stroke
File New Ctrl+N
Open Ctrl+O
Save Ctrl+S
Print Ctrl+P
Edit Undo Ctrl+Z
Redo Ctrl+Y
Cut Ctrl+X
Copy Ctrl+C
Paste Ctrl+V
Delete Delete
Blocks Block (pop-up menu) Ctrl+B
Comment Ctrl+T
Wire Ctrl+W
Wireless Ctrl+L
Program Build F7
Tools Start Debug/Start
Simulation
F11
Run F5
Exit Debug/Exit
Simulation
Shift+F11
To Next Page
Loading...
Need help?
General
