Configuration reports
CNT-SVP01C-EN 47
7. Under Air Temperature, type the mixed air temperature low-limit
setpoint and the outdoor air temperature setpoint.
8. In the Occupied Bypass Timer field, type the amount of time you
want the controller to remain in occupied bypass mode.
When a user overrides the controller to occupied bypass mode, it stays
in this mode for the time specified here.
9. Click the Download button to send your changes to the Tracer
MP580/581. Click Close to close the Configuration dialog box.
Configuration reports
After configuring the Tracer MP580/581 controller, you can save and
print reports that include the configuration parameters set up for the con-
troller. These reports can be used to verify the appropriate specifications
for the consulting engineer or to document the specifications for the
customer.
Saving configuration reports
To save a configuration report:
1. In the Active Device View, click the Reports button. The Report Selec-
tion dialog box appears.
2. Click to select the check boxes for the configuration items you want in
the report.
3. Click the Save to File button. A Save As dialog box appears.
4. Select or enter a file name for the data that will be saved. Click OK.
The file is saved as a comma-separated values (CSV) file. Use a
spreadsheet program, such as Microsoft Excel, to view the report.
Printing configuration reports
To print a configuration report:
1. In the Active Device View, click the Reports button. The Report Selec-
tion dialog box appears.
2. Click to select the check boxes for the configuration items you want in
the report.
3. Click the Print button. The Print dialog box appears.
4. Select the appropriate printer and set the print properties. Click OK.
5. Click OK. The report prints.
To Next Page
Loading...
Need help?
General
