Xerox Phaser 6000 Service Manual

4-30 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Troubleshooting
Feed Solenoid
The Feed Roller rotates when the Main Motor (FULL) and the Feed Solenoid tests
are executed simultaneously.
1. Enter Service Diagnostics (page 4-11).
2. Remove the Bypass Tray.
3. Run the Main Motor Full and Feed Solenoid tests: go to Engine Diag > Motor
Tes t > Main Motor Full and press OK, then scroll down to Feed Solenoid and
press OK.
4. Check that the Feed Roller rotates.
5. Press the Cancel button to stop the Feed Solenoid test.
6. Use the Down Arrow to scroll to the motor test, and press Cancel to stop the
motor test.
7. Replace the Bypass Tray.
s6000-150
Feed Roller

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English