Xerox Phaser 6000 Service Manual

4-50 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Troubleshooting
WorkCentre 6015 MFP Motor Test Procedures
These tests check whether the Digital Output (DO) components (motors, clutch,
and solenoids) operate. When the interlock switch is opened during a Motor Test,
the component stops.
When a paper jam or PQ problem occurs, or an error message or code is displayed,
these tests help to pinpoint the faulty part. Before executing the test, examine the
details of the jam, print quality problem, or error, and isolate the faulty parts.
These tests are available:
• Main Motor (Full, Half, Slow)
• Fan Motor (High, Low)
• Registration Clutch
•Feed Solenoid
•K Mode Solenoid
Code Component
DO-0 Main Motor (Full Rotation)
DO-1 Main Motor (Half Rotation)
DO-2 Main Motor (Slow Rotation)
DO-4 Fan Motor (Full Rotation)
DO-5 Fan Motor (Half Rotation)
DO-7 Regi Clutch
DO-9 Feed Solenoid
DO-b K Mode Solenoid
DO-10 Yellow Toner Motor
Yellow/Magenta
Toner Motor
Feed Solenoid
Registration Clutch
K Mode Solenoid
Main Motor
Fan
Cyan/Black
Toner Motor
s6015-049

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English