Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 1-15
General Information
Specifications
Printer Specifications
Printer Specifications
Characteristic Specifications
Printing Technology LED xerography
Printer Life 5 years from the start of use,
or 30 kPV or more in A4 SEF, or total number of
platen scan and ADF scan reaches 40k or more.
Average Monthly Print Volume 6000B: 250 PV/month
6010N: 350 PV/month
WorkCentre 6015 MFP: 350 to 450 PV/month
Maximum Monthly Duty Cycle 30,000 kPV/month
Monthly Scan Volume 350
Warm-Up Time Less than 25 seconds
Power Saver Mode 1 The default setting is 60 minutes. Use the
Printer Settings Utility to change the default
setting from 5 to 60 minutes.
Power Saver Mode 2 The printer enters Power Saver Mode 2 after the
specified time. The default setting is 1 minute,
and can be set from 1 minute to 60 minutes.
Resolution 1200 x 1200 dpi
Main Paper Tray (150 Sheets) Standard
Bypass Tray (15 Sheets) Standard on Phaser 6010N and WorkCentre
6015 MFPs
Memory (Phaser 6000B) 64 MB
Memory (Phaser 6010N and
WorkCentre 6015 MFPs)
128 MB
External Interfaces
Phaser 6000B
USB 2.0
■ Connector Type: One Type B
■ Protocol: Hi-speed USB 2.0 compatible
Phaser 6010N
USB 2.0 ■ Connector Type: One Type B
■ Protocol: Hi-speed USB 2.0 compatible
Ethernet
■ Connector Type: One RJ-45 connector
■ 10 BASE-T/100 BASE-TX compatible

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English