Xilinx VCU118 User Manual

VCU118 Board User Guide 94
UG1224 (v1.0) December 15, 2016
www.xilinx.com
Chapter 3: Board Component Descriptions
J2 FMC Connector Type
• Samtec SEAF series, 1.27 mm (0.050 in) pitch. Mates with SEAM series connector. More
information about SEAF series connectors is available at the Samtec website [Ref 26].
More information about the VITA 57.1 FMC specification is available at the VITA FMC
Marketing Alliance website [Ref 27].
• The 400-pin HPC connector defined by the FMC specification (see Appendix A, VITA
57.1 and 57.4 FMC Connector Pinouts) provides connectivity for up to:
°
160 single-ended or 80 differential user-defined signals
°
10 transceiver differential pairs
°
2 transceiver differential clocks
°
4 differential clocks
°
159 ground and 15 power connections
FMC HPC1 Connector J2
[Figure 2-1, callout 34]
The HPC connector at J2 implements a subset of the full FMC HPC connectivity:
• 68 single-ended or 34 differential user-defined pairs (34 LA pairs: LA[00:33])
• Ten GTH transceiver differential pairs
•Two GTH transceiver clocks
• Two differential clocks
• 159 ground and 15 power connections
Send Feedback

Xilinx VCU118 Specifications

General

Brand	Xilinx
Model	VCU118
Category	Motherboard
Language	English