YASKAWA CIPR-GA50C series Technical Manual

i.1 Receiving
14 YASKAWA SIEPC71061753C GA500 Technical Manual
i.1 Receiving
These instructions contain the information necessary to use the product correctly. Read and understand the safety
information and precautions before you start to use the product.
◆ Glossary
Phrase Definition
AOLV/PM Advanced Open Loop Vector Control for Permanent Magnet Motors
Drive YASKAWA AC Drive GA500
EDM External Device Monitor
EZOLV EZ Open Loop Vector Control
HD Heavy Duty
IPM motor Interior Permanent Magnet Synchronous Motor
MFAI Multi-Function Analog Input
MFAO Multi-Function Analog Output
MFDI Multi-Function Digital Input
MFDO Multi-Function Digital Output
ND Normal Duty
OLV Open Loop Vector Control
OLV/PM Open Loop Vector Control for Permanent Magnet Motors
PM motor Permanent Magnet Synchronous Motor (generic name for IPM motors and SPM motors)
SIL Safety Integrity Level
SPM motor Surface Permanent Magnet Synchronous Motor
V/f V/f Control
◆ About Registered Trademarks
• CANopen is a registered trademark of CAN in Automation (CIA).
• CC-Link is a registered trademark of CC-Link Partner Association.
• DeviceNet is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• EtherCAT is a registered trademark of Beckhoff Automation GmbH.
• EtherNet/IP is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• LonWorks and LonTalk are registered trademarks of Echelon Corporation.
• MECHATROLINK-I, MECHATROLINK-II, and MECHATROLINK-III are registered trademarks of
MECHATROLINK Members Association (MMA).
• Modbus is a registered trademark of Schneider Electric SA.
• PROFIBUS-DP and PROFINET are registered trademarks of PROFIBUS International.
• Other company names and product names in this document are trademarks or registered trademarks of the
respective companies.

YASKAWA CIPR-GA50C series Specifications

General

Brand	YASKAWA
Model	CIPR-GA50C series
Category	Controller
Language	English