5.3 UL Standards
198 YASKAWA SIEPC71061753C GA500 Technical Manual
Drive Model
Maximum Applicable Motor Output
kW (HP)
Time Delay Fuse
Semiconductor Protection Fuse Rated Current
Manufacturer: EATON/Bussmann
ND HD
Class J, CC, and T Fuse
Rated Current
A
Model
Fuse Rated Current
A
2056 15 (20) 11 (15) 90 FWH-200B 200
2070 18.5 (25) 15 (20) 110 FWH-200B 200
2082 22 (30) 18.5 (25) 125 FWH-225A 225
Three-Phase 400 V Class
Table 5.20 Factory-Recommended Branch Circuit Protection: Three-Phase 400 V Class
Drive Model
Maximum Applicable Motor Output
kW (HP)
Time Delay Fuse
Semiconductor Protection Fuse Rated Current
Manufacturer: EATON/Bussmann
ND HD
Class J, CC, and T Fuse
Rated Current
A
Model
Fuse Rated Current
A
4001 0.37 (1/2) 0.37 (1/2) 3 FWH-40B 40
4002 0.75 (1) 0.55 (3/4) 3.5 FWH-40B 40
4004 1.5 (2) 1.1 (2) 7 FWH-50B 50
4005 2.2 (3) 1.5 (3) 9 FWH-70B 70
4007 3.0 (4) 2.2 (3) 12 FWH-70B 70
4009 4.0 (5) 3.0 (4) 15 FWH-90B 90
4012 5.5 (7.5) 4.0 (5) 20 FWH-90B 90
4018 7.5 (10) 5.5 (10) 30 FWH-80B 80
4023 11.0 (15) 7.5 (10) 40 FWH-100B 100
4031 15.0 (20) 11.0 (15) 50 FWH-125B 125
4038 18.5 (25) 15.0 (20) 60 FWH-175B 175
4044 22.0 (30) 18.5 (25) 70 FWH-200B 200
4060 30.0 (40) 22.0 (30) 100 FWH-200B 200
◆ Low Voltage Wiring for Control Circuit Terminals
You must provide low voltage wiring as specified by the National Electric Code (NEC), the Canadian Electric
Code, Part I (CEC), and local codes. Yaskawa recommends the NEC class 1 circuit conductor. Use the UL
approved class 2 power supply for external power supply.
Table 5.21 Control Circuit Terminal Power Supplies
Input/Output Terminals Power Supply Specifications
Digital input S1 to S7, SN, SC, SP
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
Analog input A1, A2, AC ,+V
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
Analog output AM, AC Uses the LVLC power supply in the drive.
Pulse train output MP, AC
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
Pulse train input RP, AC
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
Safe disable input H1, H2, HC
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
Serial communication input/output D+, D-, AC
Uses the LVLC power supply in the drive.
Use the UL Listed class 2 power supply for external
power supply.
24 V external power supply PS, AC Use the UL Listed class 2 power supply.
To Next Page
Loading...
Need help?
General
