12.8 H: Terminal Function Selection
654 YASKAWA SIEPC71061753C GA500 Technical Manual
■ H2-61: Term MA,MB,MC Logical Operation
No.
(Hex.)
Name Description
Default
(Range)
H2-61
(1B47)
Expert
Term MA,MB,MC Logical
Operation
Sets the logical operation for the functions set in H2-01 [Term MA,MB,MC Function Selection]
and H2-60 [Term MA,MB,MC Secondary Function].
0
(0 - 8)
Note:
Refer to Output of Logical Operation Results of MFDO on page 647 for more information about the relation between parameter settings
and logical operations.
■ H2-62: Term MA,MB,MC Minimum ON Time
No.
(Hex.)
Name Description
Default
(Range)
H2-62
(1B48)
Expert
Term MA,MB,MC
Minimum ON Time
Sets the minimum ON time that the drive uses to output the logical calculation results from
terminal MA/MB-MC.
0.1 s
(0.0 - 25.0 s)
■ H2-63: Terminal P1 Secondary Function
No.
(Hex.)
Name Description
Default
(Range)
H2-63
(1B49)
Expert
Terminal P1 Secondary
Function
Sets the second function for terminal P1-C1. Outputs the logical calculation results of the
terminals set to functions by H2-02 [Term P1 Function Selection].
F
(0 - FF)
■ H2-64: Terminal P1 Logical Operation
No.
(Hex.)
Name Description
Default
(Range)
H2-64
(1B4A)
Expert
Terminal P1 Logical
Operation
Sets the logical operation for the functions set in H2-02 [Term P1 Function Selection] and H2-63
[Terminal P1 Secondary Function].
0
(0 - 8)
Note:
Refer to Output of Logical Operation Results of MFDO on page 647 for more information about the relation between parameter settings
and logical operations.
■ H2-65: Terminal P1 Minimum ON Time
No.
(Hex.)
Name Description
Default
(Range)
H2-65
(1B4B)
Expert
Terminal P1 Minimum ON
Time
Sets the minimum ON time used to output the logical calculation results from terminal P1-C1.
0.1 s
(0.0 - 25.0 s)
■ H2-66: Terminal P2 Secondary Function
No.
(Hex.)
Name Description
Default
(Range)
H2-66
(1B4C)
Expert
Terminal P2 Secondary
Function
Sets the second function for terminal P2-C2. Outputs the logical calculation results of the
terminals assigned to functions by H2-03 [Term P2 Function Selection].
F
(0 - FF)
■ H2-67: Terminal P2 Logical Operation
No.
(Hex.)
Name Description
Default
(Range)
H2-67
(1B4D)
Expert
Terminal P2 Logical
Operation
Sets the logical operation for the functions set in H2-03 [Term P2 Function Selection] and H2-66
[Terminal P2 Secondary Function].
0
(0 - 8)
Note:
Refer to Output of Logical Operation Results of MFDO on page 647 for more information about the relation between parameter settings
and logical operations.
To Next Page
Loading...
Need help?
General
