| Configuring Account Settings | 105
Parameter Description Configuration Method
Port
Select a port of Yealink meeting
server.
Note: the default port number is
0.
Web user interface
Outbound Proxy Server/
Outbound Server
The IP address or domain name
of the outbound proxy server.
Note: the default value is blank.
Web user interface
Endpoint
CTP20/CTP18
Remember password
Enable or disable remembering
password.
Note: the default value is Off.
If it is set to On, the password
will be filled in automatically
when you log in next time.
Endpoint
CTP20/CTP18
Note:
A YMS account can be logged into 5 devices at most simultaneously.
If the enterprise administrator enables the Device upgrade feature on Yealink Meeting
Server, video conferencing systems with YMS accounts logged into will upgrade the firmware
automatically once they receive the new firmware from Yealink Meeting Server.
Logging into Zoom Cloud Platform
You can log into Zoom cloud platform and call into the VMRs to join in the video conferences with other
participants.
Before you begin
For third generation VCS devices running in 50.10 or later versions, make sure you are using the Standard
mode system for your devices.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > VC Platform.
• On your VCS, go to More > Settings > Advanced > Account > Video Conference Platform.
For VP59, tap > Settings > Advanced > Account > Video Conference Platform.
•
On your CTP20/ CTP18, tap > Settings > Advanced > Account > Video Conference
Platform.
2. Configure and save the following settings:
Parameter Description Configuration Method
Cloud Account
Enables the Cloud feature.
Note: if it is set to Off, your
device cannot log into the Zoom
Cloud Platform.
Web user interface
Endpoint
CTP20/CTP18