EasyManuals Logo
Home>Yealink>Conference System>VCM34

Yealink VCM34 Administrator's Guide

Yealink VCM34
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
| Configuring Network Settings | 91
Parameter Description Configuration Method
Data Priority/
Data Priority (0-63)
Configure the DSCP
(Differentiated Services Code
Point) for data packets.
Note: the default value is 63.
The greater the number is,
the higher the priority is. If you
change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Configuring MTU
Data packets that exceed the maximum transmission unit (MTU) size for any router or segment along the
network path may be fragmented or dropped, which may result in poor quality video at the receiving device.
You can set the maximum MTU size of the data packets sent by the system.
About this task
Configure the MTU size used in calls based on the network bandwidth settings. If the video becomes
blocky or network errors occur, packets may be too large; decrease the MTU. If the network is burdened
with unnecessary overhead; packets may be too small, increase the MTU.
Procedure
1. Do one of the following:
On your web user interface, go to Network > Advanced > MTU.
On your VCS: go to More > Settings > Network Setting > Wired Network > Advanced Network >
MTU(1000-1500).
For VP59, tap > Settings > Network Setting > Wired Network > Advanced Network >
MTU(1000-1500).
On your CTP20/CTP18, tap > Settings > Network Setting > Host Network > Advanced
Network > Network MTU (1000-1500).
2. Configure and save the following settings:
Parameter Description Configuration Method
Network MTU (1000-1500)
Specify the maximum MTU size
(bytes) of data packets sent by
the system.
Note: the value can be any
integer from 1000 to 1500. The
default value is 1500.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink VCM34

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM34 and is the answer not in the manual?

Yealink VCM34 Specifications

General IconGeneral
Product typeMicrophone
Product colorBlack, Grey
LED indicatorsYes
Package depth196 mm
Package width310 mm
Package height80 mm
Package weight4260 g
Connectivity technologyWired
Ethernet LAN (RJ-45) ports2
Power source typePoE
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Quantity1
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth171.5 mm
Width169 mm
Height37.5 mm

Related product manuals