Yealink VCM34 Administrator's Guide

| Basic Settings | 137
About this task
This feature is only applicable to MeetingEye 600/MeetingEye 400/PVT960/PVT940/VC200/VC200-E.
Procedure
1. On your web user interface, go to Setting > USB Config.
2. Configure and save the following settings:
Parameter Description Configuration Method
Auto Upload Screenshot
Enable or disable the auto-
uploading of screenshot to YMS.
• On
• Off
Default: Disabled.
Web user interface
Related tasks
Configuring Local Storage
Configuring USB Storage
Configuring the Screenshot
Configuring Video Recording
The video recording feature is enabled by default and you can configure the feature.
Before you begin
If you want to record video to USB flash drive, make sure the USB flash drive is available.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.
However, you can save the recored videos to Yealink Cloud server. To record videos, go to Enterprise
Management > Collaboration Files > Recordings on Yealink Meeting Management Platform.
Procedure
1. On your web user interface, go to Setting > USB Config.
2. Configure and save the following settings:
Parameter Description Configuration Method
Recording
Enable or disable the video recording feature
on the system.
Default: On.
Web user interface

Yealink VCM34 Specifications

General

Product type	Microphone
Product color	Black, Grey
LED indicators	Yes
Package depth	196 mm
Package width	310 mm
Package height	80 mm
Package weight	4260 g
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	2
Power source type	PoE
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	171.5 mm
Width	169 mm
Height	37.5 mm