Yealink VCM34 Administrator's Guide

| Basic Settings | 120
Parameter Description Configuration Method
Time Zone
Configure the time zone. For
more information on available
time zone, refer to Time Zone.
Note: the default value is +8
China (Beijing).
Web user interface
Endpoint
CTP20/CTP18
NTP Primary Server/Primary
Server
Configure the NTP primary
server.
Default: pool.ntp.org.
Web user interface
Endpoint
CTP20/CTP18
NTP Secondary Server/
Secondary Server
Configure the NTP secondary
server.
Default: pool.ntp.org.
Web user interface
Endpoint
CTP20/CTP18
Synchronism (15~86400s)
Configure the interval (in
seconds) to update time and
date from the NTP server.
Default: 1000 seconds.
Web user interface
Configuring the DST
You can set Daylight Saving Time (DST) for the system according to the location. By default, the DST is set
to Automatic, so it can be adjusted automatically from the current time zone configuration.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Date&Time.
• On your VCS, go to More > Settings > Basic > General > Date & Time.
For VP59, tap > Settings > Basic > General > Date & Time.
•
On your CTP20/CTP18, tap > Settings > Basic > General > Date & Time.

Yealink VCM34 Specifications

General

Product type	Microphone
Product color	Black, Grey
LED indicators	Yes
Package depth	196 mm
Package width	310 mm
Package height	80 mm
Package weight	4260 g
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	2
Power source type	PoE
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	171.5 mm
Width	169 mm
Height	37.5 mm