| System Maintenance | 258
Resetting the SD card of VP59
You can reset the SD card (local storage) of VP59 to clear all captured screenshots or recorded videos.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Upgrade > Reset Built-in SD Card.
For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset Built-in
Setting Card.
The page prompt whether or not you are sure to reset.
2. Confirm the action.
Resetting the System
Generally, some common issues may occur while using the system. You can reset your system and
camera to factory configurations after you have tried all troubleshooting suggestions.
• Resetting the System via Configuration Methods
• Resetting the System by using Reset Button
• Resetting VP59 by REDIAL key
Resetting the System via Configuration Methods
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Upgrade > Reset to Factory Setting.
• On your VCS, go to More > Settings > Advanced > Reboot & Reset > Reset.
For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset.
•
On your CTP20/CTP18, tap > Settings > Advanced > System Settings > Reboot & Reset >
Reset.
It prompts whether or not you are sure to reset.
2. Confirm the action.
Resetting the System by using Reset Button
You can use the Reset button to reset the system. No Reset Key on VP59.
Procedure
On your video conferencing system or the VCC22 video conferencing camera, using tiny object (for
example, the paper clip) to press and hold the reset button for 15 seconds until the monitor turns black.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
