31 / 184
Maintenance schedule
Inspection cycle
Check item
Km/ Mile
Number of months
Initial 1000/621
initial 3
Every 5000/3107
Every 15
Every
10000/6214
Every 30
Air filter (filter element) inspection replace
Engine air inlet filter inspection replace
Bolts and nuts of muffler Fastening Fastening
** Spark plug inspection
Engine oil replace replace
Oil filter replace replace
* Throttle body inspection inspection
* Throttle cable clearance inspection inspection
Idle speed inspection inspection
*
Fuel evaporative pollutant control
system
inspection
heat sink inspection
* Fuel pipe inspection
V belt inspection
Replace every 20,000 kilometers (12427 mile)
** Braking System inspection inspection
Brake hose
inspection
Replace every 4 years
Brake fluid
inspection
** tire inspection
** Steering mechanism inspection inspection
Front fork inspection
** Rear shock absorber inspection
**
Bolts and nuts for body and engine
installation
Fastening Fastening
Coolant
inspection
Replace every 4 years or 40,000 kilometers (24855 mile)
Gearbox oil replace replace
**
Valve clearance (cold inspection)
In: 0.08~0.12mm (0.003~
Row: 0.18 ~ 0.22mm (0.007 ~ 0.009
in)
inspection
*This service is provided by a dealer or a qualified maintenance organization, if the owner has the appropriate tools,
service information, and has a certain understanding of machinery, he can implement it by himself.
**For safety reasons, such items should be provided by dealers or qualified maintenance organizations.
●The initial maintenance should be carried out strictly in accordance with the above table, otherwise it may cause
damage to the vehicle or other unpredictable failures.
●In order to keep your vehicle running normally, it is recommended to provide services by a dealer or a qualified
maintenance organization. Improper maintenance or maintenance may cause damage to the vehicle or other