8
Installation checklist
Contents of this chapter
This chapter contains a checklist of the mechanical and electrical installation of the
drive.
Checklist
Examine the mechanical and electrical installation of the drive before start-up. Go through
the checklist together with another person.
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur. If you are not a qualified electrical
professional, do not do installation or maintenance work.
WARNING!
Stop the drive and do the steps in section Electrical safety precautions (page 17)
before you start the work.
Make sure that …
The ambient operating conditions meet the drive ambient conditions specification, and
enclosure rating (IP code or UL enclosure type).
The supply voltage matches the nominal input voltage of the drive. See the type designation
label.
Installation checklist 115
To Next Page
Loading...
Need help?
General
