14
BTAC-02 pulse encoder
interface module
Contents of this chapter
This chapter contains a description and technical data of the optional BTAC-02 pulse
encoder interface module and describes how to start up the module.
Safety instructions
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur.
Hardware description
￭ Product overview
The BTAC pulse encoder interface module (option +L535) adds a digital pulse encoder
interface to the drive. Use a pulse encoder, if you need accurate speed or position
(angle) feedback from the motor shaft. The BTAC module supplies power to the encoder.
The BTAC module has the features of the BAPO-01 auxiliary power extension module.
It provides back-up power to the drive.
BTAC-02 pulse encoder interface module 205
To Next Page
Loading...
Need help?
General
