ABB ACS380 User Manual

7. Install the new fan into the fan cover. Make sure that the air flow is in the correct
direction. The air flows in from the bottom of the drive and out from the top of the
drive.
6
7
8. Connect the fan power cable.
9. Put the fan power cable into the cable slot in the drive.
8
9
10. Carefully put the fan cover into position in the drive. Make sure that the fan power
cable is routed correctly.
11. Push the cover to lock into position.
10
11
Maintenance 123

ABB ACS380 Specifications

General

Brand	ABB
Model	ACS380
Category	DC Drives
Language	English