ABB ACS380 User Manual

5. Release the locking button.
6. Move the locking part to the right.
7. Make sure that the drive is correctly installed.
To remove the drive, use a flat-head screwdriver to open the locking part.
Mechanical installation 47

ABB ACS380 Specifications

General

Mounting	Wall-mounted
Enclosure Class	IP20
Built-in Features	Braking chopper
Communication	Modbus RTU
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, ground fault
Operating Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Humidity	5 to 95% relative humidity, non-condensing
Control Method	Scalar control, vector control