ALLEN & HEATH SQ-6 Reference Guide

 70
Reference Guide V1.5.0
12.2 Input/Mix Stereo Assign
To use channels as stereo channels throughout the mixer, they must first be switched
into stereo mode.
In the ‘Setup’ screen, touch the ‘Mixer Config’ tab, then touch either ‘Input Stereo’ or
‘Mix Stereo’.
• Odd/even pairs of input channels or any mix can be switched between mono and
stereo mode by touching the ‘Mono/Stereo’ button.
• Touch the ‘Apply’ button to apply any changes.
• Touch the ‘Cancel’ button to undo changes and display the current state.
 Mixer Config changes (including mono/stereo assignments) require a restart of the core,
which interrupts audio and therefore cannot be switched per scene. Using two mono
inputs for stereo sources on a per scene basis can instead be achieved with Ganging.
mono mode
stereo mode
apply/cancel changes
stereo group
mono aux
stereo aux
stereo matrix

ALLEN & HEATH SQ-6 Specifications

General

Channels quantity	48 channels
Supported sample rates	96 kHz
Digital sound processing	- bit
DJ mixer	-
Product color	Black
Output impedance	75 Ω
MIDI out	Yes
RJ-45 ports quantity	1
Power consumption (typical)	- W

Weight and Dimensions

Depth	514.9 mm
Width	638 mm
Height	198 mm
Weight	14500 g
Package depth	680 mm
Package width	820 mm
Package height	360 mm
Package weight	17300 g