•
the bleed screw may exhibit leaks. If
dripping is detected, tighten to the ap-
propriate tightening torque;
•
the fuel tank caps for possible leaks
and the gaskets conditions.
After repairing the brake:
•
Check and bleed the system.
•
Top up the reservoir with an appropri-
ate brake fluid.
Front brake calliper
Removal
CAUTION
THE OPERATIONS REFER TO ONLY ONE BRAKE CALLIPER, BUT APPLY TO BOTH CALLIP-
ERS.
•
Undo the two screws indicated and re-
move the brake calliper.
NOTE
SHOULD IT BE NECESSARY TO REPLACE THE CALLIP-
ER, FIRST LOOSEN THE JOINT CONNECTING THE PIPE
TO THE BRAKE CALLIPER.
Refitting
•
To fit, follow the removal steps but in reverse order, and tighten the locking screws to the
prescribed torque using the recommended product.
Recommended products
Loctite 243 Medium strength threadlock
-
Locking torques (N*m)
Front brake calliper fixing screw 25
•
If the calliper is disconnected from the brake pipe:
CAUTION
SPORTCITY ONE 125 Braking system
BRAK SYS - 151