Spark plug
Check the spark plug according to the indications in the maintenance table. To reach it:
•
Remove the side fairings.
CAUTION
BEFORE CARRYING OUT THE FOLLOWING OPERATIONS AND IN ORDER TO AVOID BURNS,
LEAVE ENGINE AND MUFFLER TO COOL OFF TO AMBIENT TEMPERATURE.
•
Disconnect the cap.
•
Clean off any trace of dirt from the
spark plug base by blowing com-
pressed air.
•
Unscrew the spark plug and remove it from its seat, making sure no dust or dirt gets into the
cylinder.
•
Check that spark plug electrode and central porcelain insulator do not have carbon deposits
or corrosion; if necessary, remove them.
•
Use a thickness gauge to check the electrode gap and, if necessary, adjust it.
•
Make sure the washer is in good conditions.
•
Fit the washer and then finger tighten the spark plug.
•
Tighten to the specified torque.
Characteristic
Spark plug electrode gap
0.7 mm
Locking torques (N*m)
Spark plug 12 ÷ 14
Hub oil
Check
NOTE
USE RECOMMENDED OIL ONLY. REFER TO THE RECOMMENDED PRODUCTS TABLE.
SPORTCITY ONE 125 Maintenance
MAIN - 29
To Next Page
Loading...
Need help?
General
