Exhaust assy. Removal
•
Rest the vehicle on its centre stand.
•
Undo and remove the two screws «1»
fixing the muffler to the engine.
CAUTION
BEFORE CARRYING OUT THE FOLLOWING OPERA-
TIONS, LET THE ENGINE AND THE MUFFLER TO COOL
OFF AT AMBIENT TEMPERATURE TO AVOID POTENTIAL
BURNS.
Locking torques (N*m)
Nut fixing exhaust manifold to engine 15
•
Undo and remove the screws «2».
•
Remove the muffler.
NOTE
UPON REFITTING, REPLACE THE GASKET BETWEEN
THE EXHAUST MANIFOLD AND THE MUFFLER WITH A
NEW ONE.
Locking torques (N*m)
Muffler plate-engine fixing screw 25.5
Removal of the engine from the vehicle
•
Rest the vehicle on its centre stand.
•
Remove the side fairings.
•
Take out the spark plug tube.
•
Disconnect the starter motor power
connector «1» and the ground lead
«2».
•
Disconnect the generator connector
«3».
SPORTCITY ONE 125 Engine from vehicle
ENG VE - 59