12. Convergence
12.5 Closing off the Light Processor compartmen t
Necessary tools
•7mmfl at screwdriver.
• 3mm Allen wre nch.
How to close off the Light Processor c ompartment?
1. Place the fan on top of the Light Processor in the lower position. Ensure that the four mounting pins (1) of the fan assem bly a re
engaged.
Caution: Take care of the wire.
1
1
Image 12-11
2. Install the side cover plate of the Light Processor c ompa rtment.
3. Install the top c over of the projector.
4. Install the left side co ver of the pr ojector.
5. Switch on the projector.
6. Clear the security warning. See "Authorization to clear secu rity warning on the projector", page 117.
98
R5906693 DP2K-E SERIES 19/06/2015
To Next Page
Loading...
Need help?
General
