33.26
Removing and installing
suspension strut
•
Remove dualseat.
•
[RT] Remove small left/right side sections of
fairing.
•
Remove rear wheel.
•
[GS] Unscrew hydraulic spring adjuster using
6 mm Allen key, BMW No. 31 5 600.
•
Remove/install suspension strut.
X Tightening torque:
Suspension strut on swinging arm/rear frame
[RS] (8.8 screw) ........................................... 43 Nm
[RS] (10.9 screw) ......................................... 50 Nm
[GS/R/RT] (10.9 screw)................................ 50 Nm
Hydraulic spring adjuster
at footrest plate ........................................... 22 Nm
RS
RS330050
GS/RT
GS330440
To Next Page
Loading...
Need help?
General
