2 Make sure that nothing can block the
patient air inlets on the side of the Vivo 65.
4.3 Connecting the Vivo 65 to AC power (Mains)
WARNING!
Read the chapter 2.2 Electrical Safety, page 13 carefully to make sure all conditions are con-
sidered and met.
1 Plug the AC power (Mains) cord into
the power inlet of the Vivo 65.
2 Secure the power cord using the
restraining clip.
3 Connect the power cord to the AC power (Mains) supply.
To isolate the Vivo 65 from the AC power (Mains) supply, remove the power cord from
the AC power inlet.
Preparing the Vivo 65 for Use 33
Doc. 006150 M-1 User manual
To Next Page
Loading...
Need help?
General
