Breas Vivo 55 User Manual

5.3.20 EtCO
2
EtCO
2
displays the end-tidal carbon dioxide, measured on the last portion of the exhaled
volume that is passing through the EtCO
2
sensor.
5.3.21 InspCO
2
InspCO
2
displays the inspired carbon dioxide.
5.4 Functions and Parameters in the Vivo 65
The parameters used for controlling the breathing by the ventilator are described below.
Depending on the setup for Home mode adjustment, parameters may not be available or
have limited ranges when the Vivo 65 is in Home mode.
5.4.1 Parameters’ Availability in Different Modes
This table offers an overview of the available parameters in each mode.
Modes
Parameter
PCV PSV VCV PCV
SIMV
VCV-
SIMV
PCV-
MPV
VCV-
MPV
CPAP
Insp. Pressure x x x x
PEEP x x x x x
Breath Rate x x
Insp. Time x x x x x x
Backup Insp. Time x
Sigh
Sigh rate
Sigh %
x x x
Rise Time x x x x x x x
Insp. Trigger x
(2)
x x
(2)
x x x x
Exp. Trigger x x x
Min Insp. Time x
Max Insp. Time x
Backup Rate x x x
Target Volume
(1)
:
Max Pressure
Min Pressure
x x
Tidal Volume x x x
Flow pattern x x x
SIMV rate x x
SIMV support
pressure
x x
CPAP x
1= Indicated by the (TgV) suffix to the mode description on the display. When activated, Insp. Pressure is replaced
by Max Pressure and Min Pressure.
2= Indicated by the (A) suffix to the mode description on the display.
56 How to Use the Vivo 65
User manual
Doc. 006150 M-1

Breas Vivo 55 Specifications

General

Brand	Breas
Model	Vivo 55
Category	Medical Equipment
Language	English