5.1.2 Stopping Treatment and Turning Off
1 To stop treatment and enter Standby
mode, first press and hold the Start/Stop
button on the front panel.
2 Release the Start/Stop button on the
front panel when the progress bar is filled.
3 Press the Audio Pause button within 10
seconds. Press the button firmly.
4 When the Vivo 65 is not in an active
treatment mode, press the Standby button
on the side panel to change the unit to a low
power standby state.
How to Use the Vivo 65 43
Doc. 006150 M-1 User manual
To Next Page
Loading...
Need help?
General
