Breas Vivo 55 User Manual

5.4.2 Insp. Pressure
The Insp. Pressure setting is used to define the airway pressure during the inspiratory phase.
Minimum/maximum working IPAP is limited/achieved by a software control of blower
speed vs. measured pressure.
Min 4 cmH
2
O
Max 60 cmH
2
O
Default 15 cmH
2
O
Resolution 0.5 cmH
2
O < 10 cmH
2
O
1.0 cmH
2
O ≥ 10 cmH
2
O
Tolerance ± (0.5 cmH
2
O + 5%)
5.4.3 PEEP
The PEEP setting is used to define the airway pressure at the end of the expiratory phase.
Min 2 cmH
2
O
Off (Off is only for dual limb circuits and active exhalation valve circuits)
Max
30 cmH
2
O (Adult mode)
20 cmH
2
O (Paediatric mode)
For SIMV and pressure ventilation modes: The max setting is also
limited byInsp. Pressure -2 cmH
2
O or SIMV Support Pressure - 2 cmH
2
O.
Default 5 cmH
2
O (Adult mode)
2 cmH
2
O (Paediatric mode)
Resolution 0.5 cmH
2
O < 10 cmH
2
O
1.0 cmH
2
O ≥ 10 cmH
2
O
Tolerance ± (0.5 cmH
2
O + 5%)
5.4.4 Breath Rate
The Breath Rate setting defines the minimum number of breaths the ventilator will deliver
as long as no inspiratory trigger effort from the patient is detected. The cycles will be venti-
lator-initiated breaths.
The combination of the Breath Rate and Inspiratory Time setting is limited by the I:E ratio
range, 2:1 to 1:99.
Min
4 breaths/minute (Adult mode)
6 breaths/minute (Paediatric mode)
Max
40 breaths/minute (Adult mode)
60 breaths/minute (Paediatric mode)
Default
12 breaths/minute (Adult mode)
20 breaths/minute (Paediatric mode)
Resolution 1
Tolerance ± 2%
5.4.5 Backup Rate
The Backup Rate setting defines the minimum number of breaths the ventilator will deliver
as long as no inspiratory trigger effort from the patient is detected. The cycles will be venti-
lator-initiated breaths.
How to Use the Vivo 65 57
Doc. 006150 M-1 User manual

Breas Vivo 55 Specifications

General

Brand	Breas
Model	Vivo 55
Category	Medical Equipment
Language	English