Clean the Automatic Maintenance System (AMS)
Introduction
Clean the Automatic Maintenance System station daily.
Equipment
• Cloth-Poly Wipe 10cm x 10cm (lint-free)
• Isopropyl alcohol (IPA)
• Flush (3010106646 Flush UV 1 litre)
Procedure
1.
Select the Maintenance Tab.
2.
Select Clean AMS icon.
3.
Remove the cover plate by inserting an object such as the handle end of a swab into the small
hole, then slide it in the direction of the arrow on the cover, then lift it off.
Clean the Automatic Maintenance System (AMS)
190 Chapter 11 - Maintenance
To Next Page
Loading...
Need help?
General