Counters Module
Introduction
The Counters module displays counters that are of interest to the operator. It shows counters for
each colour of ink and the total ink used. Some of the counters can be reset.
Counters
Component - function table
Counters Explained
Component Function
Lifetime Counters
These counters display a cumulative total of ink consumed or area printed
over the whole life of the printer.
Resettable Coun‐
ters
These counters display a cumulative total of ink consumed or area printed
since the Reset button was last pressed. Time and date of last reset is dis-
played, if available.
Reset
The reset function will zero all the counters in the Resettable column.
Prints Completed
A measurement of the total number of prints completed to date. Each
completed copy of a job will advance this counter. Special prints (nozzle
check, alignment prints, etc.), overprints, and cancelled copies do not af-
fect this counter. Display shows measurement in each possible printer
configuration (flatbed/roll to roll) and an overall total.
Printing Time
A measurement of the total printing time to date. This is a complete meas-
ure of printing time, including special prints, overprints, and cancelled
prints. Display shows measurement in each possible printer configuration
(flatbed/roll to roll) and an overall total.
4
Counters Module
Chapter 4 - Navigate the User Interface 53
To Next Page
Loading...
Need help?
General