Operator access
i-Vu CCN Pro 4.2 39
To delete a privilege set
1 Click the menu button , then select System Options.
2 Select Privilege Sets in the tree.
3 Select the privilege set to be deleted.
4 Click Delete.
5 Click OK.
6 Click OK again.
Operators and operator groups
The Administrator (see "Default operators" below) sets up each operator in i-Vu CCN Pro by entering the
necessary settings and assigning one or more privilege sets to the operator.
Operator groups give you the ability to assign privilege sets to a group of operators instead of the individual
operators. Operator groups are useful if you have multiple operators who need the same privilege set or you
have positions with high turnover rates.
You can assign an operator to a group when you enter the operator or when you create the operator group.
NOTE When using hierarchical servers, you must create identical operators on each server in order to
navigate across servers.
Default operators
CAUTION i-Vu CCN Pro is installed with the following default operators:
Administrator The Admin privilege set (page 38) that
contains almost all privileges
Type Administrator in the
field, then click
.
Anonymous The Standard privilege set that
contains only viewing privileges
Click
.
To ensure system security, log in as the Administrator, then do one of the following:
• Assign the Admin privilege set to another operator, then delete the Administrator operator
• Assign a password to the Administrator operator
CAUTION Passwords can be forgotten. To ensure access to the administrative functions of i-Vu CCN Pro,
assign the Admin privilege set to at least two operators.
If you want to prevent Anonymous access to your system, delete the Anonymous operator.
To Next Page
Loading...
Need help?
General
