Operator access
40 i-Vu CCN Pro 4.2
To add or edit an operator
1 Click Main Menu button , then select System Options.
2 On the tree, click Operators
3 Click Add to enter a new operator, or select an operator to edit his settings.
4 Enter information on this page as needed. The only required fields are Name and Login Name. See table
below.
5 Click OK.
The name the operator must type to log in to the system. This name must be
unique within the system.
Enable this field, then type the current and new passwords.
An operator can change his password on the My Settings page (page 41).
Force User to Change
Password at login?
Forces the operator to change his password immediately after his next login.
Use this field with the
field to create a temporary
password that the operator must change after his next login.
Exempt From
Password Policy
If the advanced password policy is enabled in
>
on
the Security tab, select this option if you do not want the policy to apply to this
operator.
options If the automatic logoff feature is enabled in
>
on
the Security tab, select one of the 3 logoff options.
You can enter contact information for this operator.
An operator can enter contact information on the
>My
Settings page (page
41).
and
The location and page i-Vu CCN Pro will display after the operator logs in.
System-wide Privilege
Sets
To assign a privilege set to the operator, select the privilege set's checkbox.
• Click
Show current privileges only
to see only the selected privilege sets.
• A grayed out privilege set with a group name beside it indicates the operator is
inheriting that privilege set from the group.
To add the operator to a group, select the group's checkbox.
Click
Show current privileges only
to see only the selected groups.
To delete an operator
1 Click Main Menu button , then select System Options.
2 On the tree, click Operators.
3 Select the operator.
4 Click Delete.
5 Click OK.
To Next Page
Loading...
Need help?
General
