Carrier i-Vu CCN Pro 4.2 User Manual

Monitor and control equipment
46 i-Vu CCN Pro 4.2
To display driver
1 Right-click an equipment in the navigation tree.
2 Select Driver Properties from the drop-down menu.
To change driver
1 Right-click an equipment in the navigation tree.
2 Select Driver Properties from the drop-down menu.
3 Right-click Driver in navigation tree and select Configure.
4 Browse to desired driver and click Add.
To set driver properties
1 Right-click an equipment in the navigation tree.
2 Select Driver Properties from the drop-down menu.
3 Expand Protocols and select desired protocol.
4 Select Port, Timing, and Protocol Configuration.
NOTE Refer to the Integration Guide documentation for your specific protocol for detailed instructions.
i-Vu CCN Pro CCN schedules
There are two types of CCN schedules:
• 1 – 64 are local schedules that reside within the equipment
• 65 – 99 are network or global schedules, which are sent over a CCN network and received by controllers
that contain network schedules
i-Vu CCN Pro supports both local and global schedules.
Most CCN equipment is shipped with the default schedule of 64. See exceptions below.
Equipment
i-Vu CCN Pro's default
schedule number
Comfort Controller/UC/Expansion Controllers 0
Any controllers using a custom equipment file (*.equip)
created with ApplicationBuilder
0
Gen III VVT, 48/50EJ (Conquest), FSM, CSM 1
All PICs 64
CAUTION! Confirm the actual schedule numbers that are in use in the controller, as they may have been
changed from their programmed default settings.
In order to utilize i-Vu CCN Pro schedules, the i-Vu CCN Pro schedule number must match the CCN schedule
number at the controller. This can be set in i-Vu CCN Pro by selecting the equipment in the navigation tree

Carrier i-Vu CCN Pro 4.2 Specifications

General

Brand	Carrier
Model	i-Vu CCN Pro 4.2
Category	Control Systems
Language	English