Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
9-6
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
Summary of Security Permissions for TL1 Commands
9.6 Summary of Security Permissions for TL1 Commands
Table 9-8 summarizes the security permissions (access levels) for each available TL1 command and
autonomous message.
Table 9-8 TL1 Commands and Messages Security Permissions (Access Levels)
Command or Message Description
User Access Levels
RRWRWA
ACT-USER Activates user session (login).
See ACT-USER, page 9-9.
Yes Yes Yes
ALW-MSG-ALL Allows automatic (REPT) messages.
See ALW-MSG-ALL, page 9-9.
Yes Yes Yes
APPLY Applies software cutover.
See APPLY, page 9-11.
No No Yes
CANC-USER Cancels user session (logoff).
See CANC-USER, page 9-12.
Yes Yes Yes
COPY-RFILE Copies remote or local file to FFS.
See COPY-RFILE, page 9-12.
No Yes Yes
CPY-MEM Copies log file from RAM to FFS.
See CPY-MEM, page 9-14.
No Yes Yes
DLT-RFILE Deletes file from FFS.
See DLT-RFILE, page 9-15.
No Yes Yes
DLT-USER-SECU Deletes a user.
See DLT-USER-SECU, page 9-16.
No No Yes
ED-DAT Edits date and time.
See ED-DAT, page 9-16.
No No Yes
ED-DWDM Edits optical parameters.
See ED-DWDM, page 9-17.
No Yes Yes
ED-ENV Edits power bus mode.
See ED-ENV, page 9-18.
No Yes Yes
ED-NE-GEN Edits general IP-related parameters.
See ED-NE-GEN, page 9-19.
No Yes Yes
ED-PID Edits user password.
See ED-PID, page 9-20.
Yes
(own UID)
Yes
(own UID)
Yes
(all UIDs)
ED-USER-SECU Edits a user’s name and parameters.
See ED-USER-SECU, page 9-21.
No No Yes
ENT-USER-SECU Enters new user.
See ENT-USER-SECU, page 9-21.
No No Yes
INH-MSG-ALL Inhibits some automatic messages.
See INH-MSG-ALL, page 9-22.
Yes Yes Yes
INIT-SYS Initializes (reboots) system.
See INIT-SYS, page 9-25.
No Yes Yes

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English