Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
9-32
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.22 REPT EVT FXFR
Command REPT EVT FXFR
Reports autonomous events related to the FTP file transfer (see “COPY-RFILE” section on page 9-12).
Reports when an event related to the file transfer is logged.
Syntax
<sid> <date> <time>
A <atag> REPT EVT FXFR
"<aid>:<filename>,<fxfr_status>[,<fxfr_rslt>][,<bytes_xfrd>]"
;
condtype
(ccm)
MAXCTMPHYSTCHGD
(EQPT)
“Max Ctmp (case temperature) Hysteresis Changed”
(cerent15216EdfaCtmpMaxHysteresis).
MINCTMPCHGD
(EQPT)
“Min Case Temperature Changed”
(cerent15216EdfaCtmpMin).
MINCTMPHYSTCHGD
(EQPT)
“Min Ctmp (case temperature) Hysteresis Changed”
(cerent15216EdfaCtmpMinHysteresis).
CUTOVERRESET
(EQPT)
(Software) “Reset after Cutover”
(cerent15216EdfaOpCutover).
SOFTWARELOAD
(EQPT)
(New) “Software Load” (cerent15216EdfaOpLoad).
SOFTWARERESET
(EQPT)
“Software Reset” (cerent15216EdfaOpReset).
condeff string
TC
Effect of the condition. Always TC (transient condition).
date yyyy-mm-dd Date of origination of TL1 message.
ocrdat m-d Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
ocrtm h-m-s Time (hour-minute-second) of the event occurrence
(derived from cerent15216EdfaDateAndTimeString).
sid string Source identifier uniquely identifies the source of a TL1
autonomous command.
srveff Effect on service. Possible values are:
SA Service affecting.
NSA Non-service affecting.
time hh:mm:ss Time of origination of TL1 message.
Table 9-28 REPT EVT DWDM / REPT EVT ENV / REPT EVT EQPT Syntax Description (continued)
Parameter Syntax Description

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English