Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
9-9
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7 TL1 Commands and Autonomous Messages
9.7.1 ACT-USER
Command ACT-USER
Activates user session (login).
Syntax
ACT-USER:[<tid>]:<uid>:<ctag>::<pid>;
Example 9-1 ACT-USER Command
Amp01:ONS15216 EDFA2> ACT-USER:Amp01:JOE:123::***;
9.7.2 ALW-MSG-ALL
Command ALW-MSG-ALL
Permits or resumes the dispatch of automatic messages from the ONS 15216 EDFA2 that were inhibited
by an INH-MSG call. All alarms in existence at the time that this command restores them are transmitted
via REPT ALM and REPT EVT messages.
Syntax
ALW-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];
Example 9-2 ALW-MSG-ALL Command
Amp01:ONS15216 EDFA2> ALW-MSG-ALL:Amp01::123::MJ,LOS;
Table 9-9 ACT-USER Syntax Description
Parameter Syntax Description
uid string The user’s identifier (user name). Can be any combination of up
to 10 alphanumeric characters.
pid string The user’s private identifier (password). The password must be
a string of up to 10 characters, where at least 2 are
non-alphabetic characters and at least 1 is a special character.
Special characters are +, #, and %. (defined in Telcordia
GR-831-CORE).

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English