Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
9-8
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
Summary of Security Permissions for TL1 Commands
RTRV-ENV Retrieves power bus mode.
See RTRV-ENV, page 9-50.
Yes Yes Yes
RTRV-HDR Retrieves header (pings NE).
See RTRV-HDR, page 9-51.
Yes Yes Yes
RTRV-INV Retrieves inventory parameters.
See RTRV-INV, page 9-51.
Yes Yes Yes
RTRV-NE-GEN Retrieves general IP-related parameters.
See RTRV-NE-GEN, page 9-52.
Yes Yes Yes
RTRV-RFILE Retrieves files on FFS.
See RTRV-RFILE, page 9-54.
Yes Yes Yes
RTRV-TH-DWDM Retrieves optical thresholds.
See RTRV-TH-DWDM, page 9-55.
Yes Yes Yes
RTRV-TH-ENV Retrieves power-bus thresholds.
See RTRV-TH-ENV, page 9-56.
Yes Yes Yes
RTRV-TH-EQPT Retrieves general thresholds.
See RTRV-TH-EQPT, page 9-57.
Yes Yes Yes
RTRV-TOD Retrieves date and time.
See RTRV-TOD, page 9-59.
Yes Yes Yes
RTRV-USER-SECU Retrieves access level of user(s).
See RTRV-USER-SECU, page 9-60.
Yes
(own UID)
Yes
(own UID)
Yes
(all UIDs)
SET-ATTR-SECUDFLT Sets timeout values for access levels.
See SET-ATTR-SECUDFLT, page 9-60.
No No Yes
SET-TH-DWDM Sets optical thresholds.
See SET-TH-DWDM, page 9-61.
No Yes Yes
SET-TH-ENV Sets power-bus thresholds.
See SET-TH-ENV, page 9-62.
No Yes Yes
SET-TH-EQPT Sets general thresholds.
See SET-TH-EQPT, page 9-63.
No Yes Yes
STA-LOCL-RST Resets all parameters to
manufacturer’s default values.
See STA-LOCL-RST, page 9-64.
No No Yes
Table 9-8 TL1 Commands and Messages Security Permissions (Access Levels) (continued)
Command or Message Description
User Access Levels
RRWRWA

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English