FINAL DRAFT - CISCO CONFIDENTIAL
9-52
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter 9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.37 RTRV-NE-GEN
Command RTRV-NE-GEN
Retrieves general parameters of the ONS 15216 EDFA2. Retrieves sid/tid name, IP address and mask,
and default router information. Also retrieves the boot table content.
Syntax
RTRV-NE-GEN:[<tid>]::<ctag>;
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:NAME=<name>,IPADDR=<ipaddr>,IPMASK=<ipmask>,DEFRTR=<defrtr>,
BOOTRECORDTYPE1=<bootrectype1>, BOOTFILENAME1=<bootfilename1>,BOOTIPADDR1=<bootipaddr1>,
BOOTRECORDTYPE2=<bootrectype2>,BOOTFILENAME2=<bootfilename2>,
BOOTIPADDR2=<bootipaddr2>,CLI=<cli>"
;
Table 9-43 RTRV-INV Syntax Description
Parameter Syntax Description
date yyyy-mm-dd Date of origination of TL1 message.
time hh:mm:ss Time of origination of TL1 message.
aid EQPT and ALL have same input effect.
EQPT General parameters of the ONS 15216 EDFA2 (not directly
affecting optical signal or power bus).
ALL Any or all of the preceding (command input only).
cleicode string CLEI code (cerent15216EdfaCLEI).
descr string System description (cerent15216EdfaPhysicalDescr).
fwrev string Firmware revision number
(cerent15216EdfaPhysicalFirmwareRev).
hwrev string Hardware revision number
(cerent15216EdfaPhysicalHardwareRev).
mfg string Manufacturer name (cerent15216EdfaPhysicalMfgName).
model string Model name (cerent15216EdfaPhysicalModelName).
name string System’s sid/tid name (sysName).
serialnum string System serial number (cerent15216EdfaPhysicalSerialNum).
swrev string Software revision number
(cerent15216EdfaPhysicalSoftwareRev).